[H4ck3tt420]

Can anyone help me please
So I have a 2015 yzf abs and I was riding the Other day and my Speedo went from 60mph to 0 then my abs light came on and when I turn it off over night and start it again the next day it’s starts to work fine again then after about 5 mins of riding it displays 0 again. any ideas ??
tried replacing front abs sensor still no luck and dose anyone know how the bike reads the speed is it through both abs sensor or dose it have a separate speed sensor?

 

[NorthCust]

I don't have a gen2 so cannot verify this, but allegedly it somehow reads it from the engine itself (presumably rpm x gear). You'd think it would read it from the abs sensors (since why wouldn't you, there's two perfectly good readings right there).. but I was corrected and apparently not, though I cannot verify or disprove it since i dont have a gen2.

 

[Teo]

I'm guessing you already did but check the back abs sensor aswell. Make sure the wire isn't broken anywhere.

 

[H4ck3tt420]

Still not fixed the problem and I’m just gonna replace rear abs sensor see if that dose the trick just not had time to do it yet thanks for the advice