Yamaha YZF R125 Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 · (Edited)
As io the last couple days my bike has been doing some weird stuff. The blue wire connecting to the bottom of my ignition barrel had come of, and after soldering back on the bike won’t show as being in neutral although it is making the electric start not work either. Tried bump starting once and it worked but electric start doesn’t do anything.

any help appreciated
 

·
Super Moderator
2008 YZF-R125 (180cc)
Joined
·
707 Posts
there's a very helpful wiring diagram on page 8-7 of the service manual which, along with a multimeter, should allow you to figure out what's going on:
Font Parallel Slope Rectangle Number


so this is basically the sequence of switched and conditions which have to be met to engage the starter etc. If you don't have a copy of the service manual there's pdf versions floating around, not difficult to find, and a must-have.
 
1 - 2 of 2 Posts
Top