Yamaha YZF R125 Forums banner

1 - 20 of 27 Posts

·
Premium Member
Joined
·
5,594 Posts
Discussion Starter · #1 ·
Pretty much i have got a honda cbf 125 and i was wondering what people thought of these...
appart from it sounding like a tractor when it idles...
let me know :)
also what possible things that you guys think i should customize on it (dont worry i am getting an exhaust once i get my driving test out of the way...)
 

·
Premium Member
Joined
·
5,218 Posts
Get some pictures of it up, and people might be able to suggest something :p

It;s not TOO slow compared to the R125 ;)
:D
 

·
Premium Member
Joined
·
5,594 Posts
Discussion Starter · #4 ·
haha, nah it is a honda cbf :p the chinese haven't thought to rip this bike off yet :p
so far i have put some carbon fibre stuff on the rear mud guard,
10mm wheel tape on the back and 6mm on the front,
got new indicators but haven't fitted yet
blue bulbs and some other carbon fibre things...

DSC_0048.JPG
 

·
Registered
Joined
·
4,450 Posts
haha, nah it is a honda cbf :p the chinese haven't thought to rip this bike off yet :p
so far i have put some carbon fibre stuff on the rear mud guard,
10mm wheel tape on the back and 6mm on the front,
got new indicators but haven't fitted yet
blue bulbs and some other carbon fibre things...
Nice i see a few of those round my way... none as mint and clean as yours though
 

·
Registered
Joined
·
4,450 Posts
Tom Bark said:
i try to clean it as much as possible, nothing is as bad as a dirty bike in my opinion :p
Hearing that dude try keep my bike mint as much as possible.

Sent from my iPhone using Forum Runner
 

·
Registered
Joined
·
242 Posts
my friends got one of these, be sure to pay attention to the exhaust as it WILL rust lol
 

·
Premium Member
Joined
·
5,594 Posts
Discussion Starter · #12 ·
my friends got one of these, be sure to pay attention to the exhaust as it WILL rust lol
i guess when it starts to rust i shall HAVE to replace it with a scorpion ;) and kostarasthegreat, thats fair enough, the riding position is sooo comfortable
 

·
Registered
Joined
·
242 Posts
i guess when it starts to rust i shall HAVE to replace it with a scorpion ;) and kostarasthegreat, thats fair enough, the riding position is sooo comfortable
haha he has a leovince now i think? sounds ALOT better
 

·
Administrator
Joined
·
10,703 Posts
i guess when it starts to rust i shall HAVE to replace it with a scorpion ;) and kostarasthegreat, thats fair enough, the riding position is sooo comfortable
try put a akrapovic on there
 

·
Premium Member
Joined
·
5,594 Posts
Discussion Starter · #15 ·
haha he has a leovince now i think? sounds ALOT better
possibly, i think the leovince gives the best power increase (still not allot)
part of me wants the devil, it sounds sooooo nice, but its so expensive...
 

·
Premium Member
Joined
·
5,594 Posts
Discussion Starter · #16 ·
try put a akrapovic on there
would have to make a custom one, fisher is thinking about helping me make a custom one, :p
i think i would get a spare cbf exhaust, cut the can off and then weald a sports end can on :p then see how that sounds. would be allot cheaper
 

·
Premium Member
Joined
·
5,218 Posts
Probably wouldn't need welding... Most of them just slip on.
 

·
Premium Member
Joined
·
5,594 Posts
Discussion Starter · #18 ·
Probably wouldn't need welding... Most of them just slip on.
possibly, but you have seen my exhaust, there isnt really allot of room to slip it on...
ahh well, maybe we should go to loomies sometime and have a chat about it :p
if the weathers good sunday i may pop out, and take my friend with the red and white r125, come along if you want :)
 

·
Registered
Joined
·
3,268 Posts
possibly, but you have seen my exhaust, there isnt really allot of room to slip it on...
ahh well, maybe we should go to loomies sometime and have a chat about it :p
if the weathers good sunday i may pop out, and take my friend with the red and white r125, come along if you want :)
if you guys are going let me know! :)
 
1 - 20 of 27 Posts
Top