Yamaha YZF R125 Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hi everyone, my name is Chris I've been on the forum for about 3 years but this is my first time posting. i have changed the brake light on my 2015 r125 and when i took the tail panels off I've found a 24 pin connector with some jumpers on it. Has anyone got any idea what's it for? I've attached some photos of it, the first black one was just a cover.
Tire Automotive tire Motor vehicle Bicycle tire Tread
Automotive tire Motor vehicle Automotive lighting Bumper Automotive exterior
Wood Finger Gas Tints and shades Gadget
Motor vehicle Bumper Gas Automotive exterior Hood
Automotive lighting Bumper Musical instrument Office equipment Electronic instrument
Automotive tire Motor vehicle Finger Household hardware Gas

Tire Automotive tire Motor vehicle Bicycle tire Tread
Automotive tire Motor vehicle Automotive lighting Bumper Automotive exterior
Wood Finger Gas Tints and shades Gadget

Thanks
 

·
Registered
2008 YZF-R125 (180cc)
Joined
·
537 Posts
I just checked a gen1 wiring loom and it doesn't seem to have that connector so this might be a gen2 thing. I don't know of a service/workshop manual for the gen2s but if you were able to find one you could check the wiring diagrams in the appendices and that might give a clue what it's for.
 
1 - 2 of 2 Posts
Top