Yamaha YZF R125 Forums banner

Discussions Showcase Albums Media Media Comments Tags

1-4 of 4 Results
  1. Technical / Mechanical Discussion
    As the title suggests I'm looking for the lower linkage bearing, I've just sent my swing arm off for powder coating and had to remove the bearings, I am able to find the pivot bearing where the swing arm bolt is mounted to the frame however I can't find the bearing that is used to connect to the...
  2. YZF-R125 Area
    Hello recently I came back from a ride and everything was perfect but when I turned the bike off I noticed it wouldn’t go into first and the neutral light kept coming back on So when I started the bike and went to change into first the bike stalled instantly and the engine check light flashed a...
  3. YZF-R125 Area
    I started changing my exhaust yesterday on my 08 yzf and snapped off one of the manifold studs. Luckily it's not flush with the engine block but still a pain. Any idea on how to get the broken stud out? And finally, as for the pipe itself.. Despite being advertised as previously used on a...
  4. General Chat
    So im writing this post to get some help and feed back, this post maybe a little long but feel it is necessary to get to the correct conclusion, I was riding to work on my bike, and I was hitting 60mph, so I switched up to top gear, the bike stopped moving by itself so I released the throttle...
1-4 of 4 Results
Top